flex flow

For lift operations, GR Flex Flow* services combine a unique horizontal pumping system (HPS) with a versatile hydraulic jet pump (HJP) to provide many advantages over conventional lift systems:

  • Lower operating cost leading to reduced LOE
  • Less maintenance with minimal downtime (98% to 100% run time)
  • Highly mobile with unique trailer-mounted system
  • Efficient filtration system that prevents impurities from entering the pump and wellbore.
  • Versatile downhole jet pump that can be used in many completion scenarios (conventional, reverse circulation and concentric) and in conjunction with gas lift.

Compared to conventional ESP systems, the GR HJP/HPS combination saves operators lease and operating costs by eliminating the common issues of gas locking and solids handling, maintaining production over a wide range of rates and reducing well intervention and maintenance downtime.

Download Data Sheet

Capabilities of the GR Flex Flow Horizontal Pumping System

GR Energy Services deploys a unique trailer-mounted horizontal pumping system that can be used to power fluid for single or multiple jet pumps or for a SWD test pump to help determine sizing for permanent equipment. This highly mobile HPS requires little maintenance, so service callouts are kept to a minimum. In addition, it has a robust filtration system that prevents impurities from entering the pump or the wellbore.

The HPS includes the following components:

  • Centrifugal pump, consisting of stages, each with one impeller and one diffuser, that move the fluid through the pump and up into the production string. The impeller rotates and energizes the fluid, creating a velocity head, while the diffuser slows and redirects the fluid, creating a pressure head.
  • 480-V, 3,500-rpm motor, with three horsepower options—100, 300 and 500 hp.
  • Thrust chamber, which carries the thrust load developed by the multistage pump. It connects to the motor shaft on one end and the pump shaft on the other.
  • VFD with HP/kVA delivery capabilities.
  • Dual pot filter system for suction.
  • Charge pump for suction, which supplies power fluids from the tanks to the HPS.
  • 40-ft trailer with stabilizers.

Benefits of GR Hydraulic Jet Pumps

The GR hydraulic jet pump consists of a nozzle, throat and diffuser. A high-pressure fluid is pumped down the tubing through a nozzle where the fluid velocity increases, creating a low-pressure differential. This pressure differential draws in production fluid from the formation, and the mixed fluids pass through a throat and into the diffuser where the fluid is converted into low-velocity/high-pressure fluid.

Many features of the hydraulic jet pump make it a better choice in challenging oilfield environments. The pump operates efficiently in vertical, deviated and horizontal wells, is versatile enough for multiple well pad applications, and can sustain production rates of 50 to 10,000 BF/D. It has excellent gas and solids handling, and can handle returns up the casing (conventional) or up the tubing (reverse flow). No workover rig is required for pump change-out, there are no moving parts downhole, and it can be retrieved easily by wireline or hydraulics for onsite maintenance.

The advantageous use of hydraulic jet pumps over conventional pumps can be determined with NODAL analysis. GR uses NODAL analysis to demonstrate the quicker response time and enhanced accuracy of HJPs.

*Flex Flow is a mark of GR Energy Services.

Flex Flow horizontal pumping system

Flex Flow horizontal pumping system

Real-time online monitoring

The HPS and HJP can be monitored remotely to make adjustments that optimize system efficiency, including production and producing bottomhole pressure, as well as start/stop, speed change and troubleshooting. Digital cellular and satellite enabled, the programmable logic controller (PLC) can report to tablets, mobile phones and computers with multiple notification options (email, text message and phone calls).

flex flow monitoring

Screen shot from Apollo monitoring system showing real-time fluid rate and pressure, suction pressure and producing bottomhole pressure